|
|
|
|
| DC Motor Control : MCS-51 |
|
|
 |
|
|
| DC Motor Control In this project design from Microcontroller MCS-51 family AT9C1051 for control . AT24C01A is Memory EEPROM use system bus I2C |
|
|
| Feature : |
| |
 Can control DC Motor for 5Volt to 100 Volt |
| |
Speed Display by 7Segment 2 digit |
| |
Save last Data of Speed setup by EEPROM |
| |
Can Speed Adjust from 0-50Step |
|
Direction Select Mode |
|
|
|
|
|
| Hardware : |
| The Completed circuit show in figure 1 . Output signal from P3.5 for drive motor type of PWM ,P3.2 connect with Relay for change Direction of motor . AT24C01A is IC EEPROM for save Data of speed . In section display use 7 Segmen for speed display. |
|
|
|
|
|
|
 |
|
|
|
|
|
|
Figure 1. Schematics of DC Motor Control : MCS-51 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Software : |
|
| The Software of this project can explain by flowchart in figure 2 and can download source code from Software support data |
|
|
|
|
 |
|
|
| Software Support Data : |
|
|
|
|
|
|
|
|
| Download Source Code |
|
|
|
| Download Source Code for Program to MCU |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 2. Flowchart of software |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
